360°Surrounding 3D Camera System

360°Surrounding

Camera System

Productfeatures

● boot around,the surrounding situation is clear

●supports 2D panorama,3D panorama,single camera full-screen display off and openand

othercombined display modes

● support AHD,CVBS,VGA andother output interface signal formats

● support full automatic one-key calibration without manual adjustment,seamless splicing

and no blind spot on the ground

。4-channel video real-time driving record,local playback

.four-channel AHD hd signal input,clearand smooth picture quality

.narrow road real-time road conditions,driving safer

Productfeatures

● boot around,the surrounding situation is clear

●supports 2D panorama,3D panorama,single camera full-screen display off and openand

other combined display modes

● support AHD,CVBS,VGA andother output interface signal formats

● support full automatic one-key calibration without manual adjustment,seamless splicing

and no blind spoton the ground

.4-channel video real-time driving record,local playback

.four-channel AHD hd signal input,clear and smooth picture quality

.narrow road real-time road conditions,driving safer

The relevant interfaces of the host and main

bundle are as follows:

1.Power connection:connect power supply(yellow wire to normal power,red wire to ACC,black wire

to ground)

2.Red lines on the extension cord:connect the positive pole of the left andright tumsignal and the

reversing light respectively

3.Black BMW joint.connect to the front camera

4.Yellow BMW joint connect to rear camera

5.Red BMW connector:connect to the left camera

6.Blue BMW connector:connect to the right camera

7.Yellow AV interface:host video CVBS output interface,which is connected to CVBS reversing video

channel display through video extension cord

8.Blue AV interface:the host video AHD output interface is connected to the central AHD reversing

video channel display through the video extension cord

9.Brown DVD triggerline:connect the navigation and reversing detectionline

10.Yellow RF antenna,receiving knob controllersignal

11.6PIN interface:VGAvideo output interface of the host,connect to the VGA decoder,and connect

to the original vehicle screenthrough the decoder(original vehicle support is required)

12.USB interface:connect the U disk,which can be used for driving record,system upgrade and

parameter storage

13.OBD/CAN interface:some modelsare inserted into the original vehice OBD,and some models

are connected to gateway or host CANline.Specifically,according to the system setting --setting of

themodel menu prompt

14.Indicator light the flashing red light of the host machine means itis working normally,while the

flashing green light means it can receive the signalof the controller.Operatethe controller withno

flashing green light Please check whether the controller is installed with batteries or paired

successfully