Universal 360 panoramic driving system

Universal 360 panoramic driving system

Output standard remote control switching logic 

1. The host machine outputs CVBS by default Switch to CVBS-PAL output:Press the "left" button of the remote control for more than 10 seconds  without releasing, the main machine will automatically restart and switch to CVBS--PAL output. Repeat the above operation to switch to CVBS--NTSC output; NTSC--PAL loop switch. 

2、Switch to AHD output Press the "on" button of the remote control for more than 10 seconds without releasing, the main  machine will automatically restart and switch to AHDP25 output.  Repeat the above operation to switch to AHDP30 output; AHDP25--AHDP30 loop switch. 

3、Switch vGA-480P output Press the "right" button of the remote control for more than 10 seconds without releasing, the  main machine will automatically restart and switch to VGA-480P output.  Repeat the above operation to switch to VGA-720P output; 480P--720P loop switch.

Host indicator  lightStandby -- always  

onPower on -- Flicker (interval 125ms) 

AHD: flashing 

AHD -- Interval of 50ms, significantly faster than the boot process 

CVBS-- the lighting time is longer than the off time, and the lighting time is 2S 

PAL -- turn off lights 50ms 

NTSC -- lights out for 500ms 

VGA-- Lights out longer than lights on, lights out 2S 

720P -- light 50ms 

480P -- turn on 500ms

When R gear, left and right steering signals are invalid, the view can be cycled through the  buttons on the left and right side of the remote control to enter the full screen, 3D full screen and front  and rear views. Under panorama + front view, Panorama + rear view, Panorama + left view and Panorama + right  view, the view mode can be cyclically switched by remote button up and down; When the signal of left and right steering is valid, it will not switch to panorama + left View and  Panorama + right view when the signal of R block is valid; when the signal of R block is valid, it will  switch to panorama + rear view.Advanced